I recently was contacted by a guy called Chris and he told me of someone who had designed a 3d printed battery case and holder for a wingsland s6 battery.
I am going to link this at top of my website as I think this is a major help to anyone with a S6 and disapointed with the normal 5/6 mins flight time and wants longer and also cheaper batteries as S6 batteries are way over priced for dumb cells.
Also with this mod, you dont need to rip open your S6, but you will need a donor s6 battery for the mod as you will need the battery pcb and solder a connector as shown in photos below.
Heres 2 pics of the Battery mod and the holder for the battery that can fit underneath and hence one can use diferent and bigger batts.
These photos are not mine, they are Stefano’s (The designer) photos and his property and copyright.
If anyone else intrested in sending Stefano a donation for his 3d stl files so you can print out the above mods , contact me via the “contact us” tab on top of my website and I will pass on Stefano’s details.
Once again a very big Thanks to Cris for contacting me and letting me know about this great mod and also to Stefano for 3d designing it.