Category Archives: Wingsland S6

Wingsland R6 Different versions

Posted on 22nd January 2019 by graz27

Recently I got hold of another Wingsland R6 controller. First off as I wanted to grab a dump of the firmware inside, as my other R6 controller had firmware that I had cobbled together and therefore getting a working one … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , , , , | Leave a comment

Wingsland S6 Cracks in Fairy Drone spacers

Posted on 17th January 2019 by graz27

Just a warning out there to watch out for cracks, when using fairy drone props and spacers. The spacers are plastic and they are not a 100% fit as they seem a couple thou smaller in the spacing. This means … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , , | Leave a comment

Wingsland S6 scene still alive?

Posted on 14th January 2019 by graz27

Spent many a hour playing with my S6 and taking it apart , modding and fixing it. Prob spent more time on this than any other quad to be honest. Even with all the issues these have , I still … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , | Leave a comment

Wingsland S6 repaired

Posted on 14th January 2019 by graz27

My Original S6 that I blew up the esc board is now fixed, just waiting for decent weather to test. Sadly I was unable to fix the esc board I blew up, besides replacing all the 12 mosfets that had … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged | Leave a comment

Another Wingsland S6

Posted on 29th December 2018 by graz27

Well after blowing up the esc board on my S6 I got another from Banggood as they were on offer. They must be getting to the end of whats left I think, as packing on this one different to ones … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Leave a comment

Wingsland S6 props

Posted on 17th December 2018 by graz27

Trying some props that are intended for the Fairy Drone These props came with the spacers , although made out of plastic as opposed to metal that the S6 comes with they fit straight on. All you need to use … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , | Leave a comment

Wingsland S6 ESC repair

Posted on 17th December 2018 by graz27

Well I replaced all 12 mosfets that I blew up and sadly its still dead. On further examination , I found another chip had blown. But this time it was on the main board. I guess the reverse voltage I … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Leave a comment

Blew up my Wingsland S6

Posted on 23rd November 2018 by graz27

So annoyed with myself over this one! I was testing out some external lipos in my S6 and failed to noticed I had put the connector on back to front on 1 of the lipos. As I plugged it in … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Leave a comment

Working Wingsland R6 Controller

Posted on 22nd November 2018 by graz27

Well at last with a lot of mucking about , I got my R6 to work!! This was in big part to a member of the Wingsland Facebook who sent me a working dump from a Outdoor version of the … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Leave a comment

Wingsland R6 faulty flash firmware

Posted on 22nd October 2018 by graz27

Well after a bit of adding wires here and there and reading out the data using serial to wifi module, I can confirm the fault with the R6 that I got is indeed the firmware in the flash chip that … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , | Leave a comment