Monthly Archives: February 2019

Wingsland S6 Indoor Mode vs Outdoor Mode

Posted on 15th February 2019 by graz27

Thanks to a fellow friend and S6 owner, who originally let me on to this , and have mentioned some of this in a previous post. On the old firmware and app versions , there used to be 2 modes. … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , , | Leave a comment

Zerotech Dobby Hover test

Posted on 15th February 2019 by graz27

Indoor Dobby hover test. Curious how well this hovers indoors compared to the Wingsland S6 in indoor mode. No comparison really , the Dobby wipes the floor holding altitude and position. A real shame Wingsland could not get the S6 … Continue reading →

Posted in Zerotech Dobby | Tagged | Leave a comment

Wingsland S6 test with Gemfan 3025

Posted on 8th February 2019 by graz27

Test last summer with Gemfan 3025 props. Issue here is the holes dont line up as they made for 5mm spacing and on wingsland its around 9mm. So for Test just pressed down on center shaft with a bit of … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged , | Leave a comment

Wingsland S6 flight at beach

Posted on 4th February 2019 by graz27

A video of the Wingsland S6 flying down at the beach on a early morning misty day. Stock props and stock battery and controlled by a iphone. Not original video quality

Posted in Radio Control Models, Uncategorised, Wingsland S6 | Tagged | Leave a comment

Wingsland S6 test in gusty wind

Posted on 3rd February 2019 by graz27

Just going through some videos from last year and this was one from Sept 2018. The S6 started having problems trying to hold in gusty wind. Problems start around 2/3 mins into flight and the wind picks up. To be … Continue reading →

Posted in Radio Control Models, Wingsland S6 | Tagged | Leave a comment