Monthly Archives: November 2015

Well after repairing the main board and replacing all the motor bearings and on my first test it seemed to fly okay but seemed to have problems holding height and would jump in and down all of a sudden. I … Continue reading →

On my refurb of a rusted ole AR Drone I obtained, I got a new set of bearings from Blade (BLH1607). These bearings I have used before and so I ordered some more to fit to these 4 rusted motors. … Continue reading →

I have thought this through a few times and its been about 4 years since I bought the AR Drone 2.0. Back then it was out just before DJI lanched it’s Phantom 1. So in 2012  the AR Drone caught … Continue reading →

Spent some time on this AR Drone 2.0 main board to see if it was repairable…. After checking over the main pcb, I have had the small ic U1700 (DMG4413LSS Mosfet) by the power in leads fail on more than … Continue reading →

Long time since I wrote anything on here , but anyways. My poor ole AR Drone 2.0 has been sitting in its box all broken for a while, although the main board worked mostly (except for the data line was … Continue reading →